Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press
Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press
Lexson A01S-250 Ton shuttle table hydraulic press is custom built to be a four-column hydraulic press, controlled by permanent magnet synchronous servo motor, T slotted bed table for mold locking. Compare with a bench top press or a floor stand C frame hydraulic press, the four-post hydraulic press sometimes is not the suitable frame for feeding and unloading, a four-column hydraulic press that has shuttle table helps. With shuttle table moving in and out of the working area, it is much easier for the custom-made servo controlled 4-post 250 ton shuttle table hydraulic press to loading and unloading during the working cycle time.
250 Ton Servo Controlled Slide Table Hydraulic Press
Specifications of Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press
| Model No. | Lexson A01S-250T |
| Structure | Four Column |
| Drive Mode | Servo Motor |
| Nominal Force | 2500 KN |
| Table Size | 800*600 mm |
| Daylight Open | 700 |
| Stroke | 500 mm |
| System Pressure | 250 bar |
| Motor | 23 KW |
| Power Supply | AC 3 Phase 415V |
| Rated Current | 35A |
| Shuttle Table Stroke | 600 |
| Cylinders | 3 cylinders(high speed+pressing ) |
250 Ton Servo Controlled Hydraulic press with sliding table (7)
The Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press has these advantages:
- Utilizing permanent magnet synchronous servo motor, the machine ‘s quiet
- 50-70% less electricity consumption than conventional hydraulic press machine
- Hydraulic decompression control
- Safe operation
- Position control
- Time control
- Pressure control
- All these controls on HMI
- 10” HD Human-machine Interface
- NEMA enclosures
- Industry standard components
- Portable operation console
- Two-hand start button
- Emergency stop button
- Manual & Semi-automatic
- Slide rails for slide table to slide in and out
- Siemens 10” HMI & PLC
