Tag Archive for: servo controlled hydraulic press
Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press
Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press
Lexson A01S-250 Ton shuttle table hydraulic press is custom built to be a four-column hydraulic press, controlled by permanent magnet synchronous servo motor, T slotted bed table for mold locking. Compare with a bench top press or a floor stand C frame hydraulic press, the four-post hydraulic press sometimes is not the suitable frame for feeding and unloading, a four-column hydraulic press that has shuttle table helps. With shuttle table moving in and out of the working area, it is much easier for the custom-made servo controlled 4-post 250 ton shuttle table hydraulic press to loading and unloading during the working cycle time.
250 Ton Servo Controlled Slide Table Hydraulic Press
Specifications of Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press
| Model No. | Lexson A01S-250T |
| Structure | Four Column |
| Drive Mode | Servo Motor |
| Nominal Force | 2500 KN |
| Table Size | 800*600 mm |
| Daylight Open | 700 |
| Stroke | 500 mm |
| System Pressure | 250 bar |
| Motor | 23 KW |
| Power Supply | AC 3 Phase 415V |
| Rated Current | 35A |
| Shuttle Table Stroke | 600 |
| Cylinders | 3 cylinders(high speed+pressing ) |
250 Ton Servo Controlled Hydraulic press with sliding table (7)
The Custom-made Servo Controlled 4-Post 250 Ton Shuttle Table Hydraulic Press has these advantages:
- Utilizing permanent magnet synchronous servo motor, the machine ‘s quiet
- 50-70% less electricity consumption than conventional hydraulic press machine
- Hydraulic decompression control
- Safe operation
- Position control
- Time control
- Pressure control
- All these controls on HMI
- 10” HD Human-machine Interface
- NEMA enclosures
- Industry standard components
- Portable operation console
- Two-hand start button
- Emergency stop button
- Manual & Semi-automatic
- Slide rails for slide table to slide in and out
- Siemens 10” HMI & PLC
Jigsaw Puzzle Cutting Machine 500 Ton Hydraulic Press – Lexson Manufacturers
Jigsaw Puzzle Cutting Machine 500 Ton Hydraulic Press – Lexson Manufacturers
LEXSON provides a full range of up-stroke jigsaw puzzle cutting machine from 50 ton up to 3000 ton. LEXSON ‘s jigsaw puzzle cutting machine is exclusively designed and featured for jigsaw puzzle production, as well as plywood jigsaw puzzle die cutting.
With similar tonnages, LEXSON also provides a full range of down-stroke Servo controlled jigsaw puzzle machine, which we have the servo hydraulic control system to replace the conventional hydraulic system. A servo-hydraulic controlled puzzle press machine’s more advantageous, not only in efficiency but also in performance, for more details please refer to servo controlled hydraulic jigsaw puzzle machine.
Click & Contact With Our Engineering Team About Your Unique Jigsaw Puzzle Press Requirements!
LEXSON ‘s jigsaw puzzle cutting machine features:
- Up-stroke acting type
- Hydraulic system mounted at the rear side
- Two-hands press start button
- E-stop button
- Safety light curtains
- Safety mechanical stopper
- Proximity limitation control
- Pressure regulator
- Portable operation console
- Pressure gauge
- Stainless(304) steel slide rails for cutting die to slide IN & OUT
- Flatbed table and slider
- Hydraulic oil chiller
LEXSON WORLD
